Sharp UX-355L - Page 96

Caller ID
94
3
Press 1 to turn on Caller ID, or 2 to
turn it off. (If you selected 2 (NO), go
to Step 7.)
If you selected 1, the display will
show:
1 2
or
YES NO
4
Press 1 to select SET. (To clear a
previously programmed area code,
press 2 and go to Step 7.)
The display will show:
AREA CODE # MODE
1=SET,2=CLEAR
ENTER AREA CODE
5
Enter the three digits of your area
code.
(Example)
4 52
6
Press the START/MEMORY key to
store your area code.
The display will show:
1
COVER SHEET
7
Press the STOP key to return to the
date and time display.
START/MEMORY
STOP
all.book Page 94 Wednesday, April 26, 2000 7:08 PM