9
Connections
English
Connect Your Audio and
Video Source Devices
Source devices are components where a playback
signal originates, e.g., a Blu-ray Disc™ or DVD player;
a cable, satellite or HDTV tuner; etc. Your AVR has
several different types of input connectors for your
audio and video source devices: HDMI, composite
video, optical digital audio, coaxial digital audio and
analog audio.
Each of your AVR’s source buttons is assigned to an
analog audio input connector.
The digital inputs are not assigned to any specic sets
of analog inputs. Once you select a source device you
can use the remote control’s DIGITAL button to select
the specic audio input connection (HDMI, coaxial
digital, optical digital, analog) that you want to listen to.
(Note: You cannot select an audio input connection for
the FM/AM or USB source buttons.)
As you connect your various source components, ll out
the “Source Device Connected” and “Digital Audio Input
Connector Used” columns in the following table. it will
make it easy to keep track of which devices you have
connected to which connectors.
HDMI Devices
If any of your source devices have HDMI connectors,
using those connectors will provide the best possible
video and audio performance quality. Since the HDMI
cable carries both digital video and digital audio
signals, you do not have to make any additional audio
connections for devices you connect via HDMI cables.
If you have a TV equipped with the HDMI Audio Return
Channel function, its sound is fed to the AVR via the
HDMI Monitor Out connection’s Audio Return Channel,
and it will not require additional audio connections to
the AVR.
HDMI Cable
(not supplied)
HDMI-Equipped Source Device
Rear Panel
To Next Page
Loading...
Need help?
General