Shimano Steps E6000 Series - Settings Menu

Cycle Computer Display and Setting
Names and functions of the parts of the assist switch
36
Cycle Computer Display and Setting
The following explains the operation procedure for cases where the switch settings are set to the default values.
 Names and functions of the parts of the assist switch
X Changing the cycle computer display
Y
When switching assist modes: the level
of assistance becomes stronger
When shifting gears: pedaling becomes
heavier
Z
When switching assist modes: the level
of assistance becomes weaker
When shifting gears: pedaling becomes
lighter
X
Y
Z
 Basic screen display of the cycle computer
(A)
(D)
(B)
(C)
(E)
(F)
(A) Speed
Displays the current speed.
(B) Clock
Displays the current time.
(C) Speed unit display
You can switch between km/h and
mph.
(D) Battery level indicator
(E) Changing the assist mode display
(F) Gear and traveling data display
D
Displays the current battery level in six
levels.
Display Battery level
81 - 100%
61 - 80%
41 - 60%
21 - 40%
1 - 20%
0%
(D) Battery level indicator
The battery level is not displayed when
the traveling data in (F) shows "RANGE".