Cycle Computer Display and Setting
Changing the settings
41
Changing the settings
Gear shifting adjustment with the power gear shifting unit (Adjust)
Gear shifting adjustment is performed with the power gear shifting unit.
1
Assist Shift
The adjustment value is changed by
pressing Shift-Y or Shift-Z.
− 4
Gear shifting adjustment can only be
performed when a built-in power gear
shifting unit is connected.
2
Assist Shift
Press Assist-Y or Assist-Z to switch
between "OK" and "CANCEL".
− 4
3
Press Assist-X.
Selecting "OK" validates a setting while
selecting "CANCEL" cancels the setting
after which the screen returns to the
"Setting menu".
Assist Shift
The settings have a range of [-4 to 4].
Confirmation and fine-tuning of gear shifting
CAUTION
•
Improperly large adjustment may cause free spinning of the pedals during pedaling, resulting in an accidental fall.
•
Perform adjustment only when gear shifting feels unusual. Under normal conditions, performing unnecessary adjustment may worsen gear shifting
performance.
Open the Adjust screen and check
whether the adjustment value is set to
[0].
0
To Next Page
Loading...
