9
Installation
Installation
List of tools to be used
The following tools are required to assemble the product.
Component Where to use Tool
Cycle computers
Handlebar fixing bolt
Screwdriver #2
Angle adjustment screw Screwdriver #2
Assist switch Fixing bolt Screwdriver #2
Battery Mount
(SM-BME61)
Key unit
Mount lower case
3 mm Allen key
Key unit cover
Mount upper case
Screwdriver #1
Speed sensor Speed sensor fixing bolt Screwdriver #2
Magnet unit Mounting screw Screwdriver #2
Electric wire Connector
TL-EW02
Light adapter Unit fixing screw
Screwdriver #2
Drive Unit
Frame installation bolt M8 bolt and nut compatible*
Cover fixing bolt (M3)
Screwdriver #2
Front chainring Lock ring
TL-FC32 / 36+TL-FC38
Crank arm Crank installation bolt
14 mm socket wrench
* For information on compatible tools, contact a manufacturer of completed bicycles.
To Next Page
Loading...
