Shimano Steps E6000 Series - Backlight and Brightness Settings

Cycle Computer Display and Setting
Changing the settings
To be continued on next page
42
If the adjustment value is [0]
1
Assist Shift
Press Shift-Y or Shift-Z to adjust the
adjustment value up or down by 1 speed.
− 1
2
Press Assist-X.
Select "OK", then perform an actual
gear shift to check whether the
condition has improved.
Assist Shift
3
The condition has improved
Adjust the adjustment value by 1 speed
in the same direction and check the gear
shifting operation again.
Repeat these steps until any noise or
unusual feeling disappears.
− 1
− 2
3
No apparent change
Adjust the adjustment value by 1 speed
in the same direction and check the gear
shifting operation again.
If the condition has improved, see "The
condition has improved" to continue.
If the condition has worsened, see "The
condition has worsened" to continue.
− 1
− 2