EasyManua.ls Logo

Shimano Steps SC-E6000 - Walk Assist Mode Operation

Shimano Steps SC-E6000
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Charging the battery
Charging the Battery
32
2
After charging has started, the LED lamp
(E) on the charger lights up.
You can check the current charging
status on the battery level lamp (F)
located on the battery.
Lighting
up
Charging
(Within 1 hour after the
completion of charging)
Blinking
Charging error
Turned
off
Battery disconnected
(1 hour or more after the
completion of charging)
(E)
(F)
(E) Charger LED lamp
(F) Battery level lamp
DANGER
Use the battery and charger combination
specifi ed by the company for charging and
follow the charging conditions specifi ed by
the company. Not doing so may cause
overheating, bursting, or ignition of the
battery.
NOTE
If the bicycle is stored for an extended period
of time immediately after purchase, you will
need to charge the battery before using the
bicycle. Once the battery is charged, it starts
to deteriorate slightly.

Other manuals for Shimano Steps SC-E6000

Related product manuals