Shimano Steps SW-E6010 User Manual

38
 Switching between displayed traveling data (SC-E7000)
The type of traveling data displayed changes each time
you press Function button.
• Holding down Function button when DST is displayed
clears all traveling data.
• If using SW-E6010, control is also possible with Assist-A.
Function button
or
Assist
or
Function button
Display item Description
[DST] Traveling distance
[ODO] Cumulative distance
[RNG] Travelable distance *1*3
[TME] Travelable time *2
[AVG] Average speed *2
[MAX] Maximum speed *2
[CAD] Your crank rotation speed *2 *4
[CLK] Current time *2
[DST] [CLK]
[ODO] [CAD]
[RNG] [MAX]
[TME] [AVG]
*1 When [RNG] is displayed, the battery level is not displayed. The traveling range should be used as a reference only.
*2 Optional item: You can configure the display settings in E-TUBE PROJECT. For details, refer to the "Connection and
communication with devices" section.
*3 When walk assistance is functioning, the on screen display [RNG] changes to [RNG ---].
*4 Cadence is only displayed when pedaling is assisted while using electronic gear shifting.
NOTE
When traveling data is displayed, the screen returns to speed display after 60 seconds.
When speed data is displayed, pressing function button changes the traveling data displayed starting with [DST].

Shimano Steps SW-E6010 Specifications

General

Brand	Shimano Steps
Model	SW-E6010
Category	Switch
Language	English