Shimano Steps SW-E6010 - EW-EN100 Specific Settings; RD Protection Reset (EW-EN100); Adjust Gear Shifting (EW-EN100); Drive Unit Data Backup

54
 [Shifting advice] shifting advice setting (SC-E6100 only)
Turn the shifting advice function ON/OFF.
If turned [ON], this notifies you of the recommended timing at which to shift based on the bicycle riding conditions
during manual shifting mode.
1. Enter the [Shifting advice] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Shifting advice],
then press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2. Press Assist-X or Assist-Y to move the cursor to the
item you want to configure.
Assist
Configurable
items
Details
[ON] Enable the shifting advice function
[OFF]
Disable the shifting advice
function
3. Press Function button to confirm the setting.
If using SW-E6010, control is also possible with
Assist-A.
* The screen will automatically return to the setting
menu screen.
Function button
Assist
Function button