48
[Light] Light ON/OFF (SC-E7000 only)
Configure the battery-powered light setting.
1.
Enter the [Light] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Light], then
press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2.
Press Assist-X or Assist-Y to select the required setting.
Assist
Configurable items Details
[ON] Keep light always on
[OFF] Keep light always off
3.
Press Function button to confirm the setting.
If using SW-E6010, control is also possible with
Assist-A.
*
After confirmation, the screen will automatically
return to the menu list screen.
Assist
Function button
To Next Page
Loading...
