52
[Font color] Font color settings
Toggle the font character color between black and white.
1.
Enter the [Font color] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Font color], then
press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2.
Press Assist-X or Assist-Y to move the cursor to the
item you want to configure.
Assist
Configurable items
[White]
[Black]
< SC-E6100 >
White
Black
< SC-E7000 >
[White]
[Black]
3.
Press Function button to confirm the setting.
If using SW-E6010, control is also possible with
Assist-A.
*
The screen will automatically return to the setting
menu screen.
Assist
Function button
[Adjust] Gear shifting adjustment with the electronic gear shifting unit
If you need to adjust the rear shifting unit, contact the place of purchase.
To Next Page
Loading...
Need help?
General
