49
[Beep] Beep setting
Turn the beep sound ON/OFF.
Even when [Beep] is set to [OFF], a beep will sound when there is a misoperation, system error, etc.
1.
Enter the [Beep] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Beep], then
press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2.
Press Assist-X or Assist-Y to move the cursor to the
item you want to configure.
Assist
Configurable
items
Details
[ON] Enable beeps
[OFF] Disable beeps
< SC-E6100 > < SC-E7000 >
3.
Press Function button to confirm the setting.
If using SW-E6010, control is also possible with
Assist-A.
*
The screen will automatically return to the setting
menu screen.
Assist
Function button
To Next Page
Loading...
