47
[Brightness] backlight brightness setting (SC-E6100 only)
Set the display brightness.
1.
Enter the [Brightness] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Brightness], then
press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2.
Press Assist-X or Assist-Y to adjust the brightness.
Brightness can be adjusted to one of five levels.
Assist
3.
Press Function button to confirm the setting.
If using SW-E6010, control is also possible with
Assist-A.
*
The screen will automatically return to the setting
menu screen.
Assist
Function button
To Next Page
Loading...
