43
Configurable
items
Details
[Exit] Return to setting menu.
[DST] Reset the traveling distance
[Default]*
Reset the setting values of the
cycle computer.
*
SC-E6100 only
Items and default values reset by [Default] are as
follows:
•
[Backlight]: [ON]
•
[Beep]: [ON]
•
[Unit]: [km]
•
[Language]: [English]
•
[Brightness]: [3]
•
[Font color]: [White]
3.
Press Function button to reset the selected item.
If using SW-E6010, control is also possible with
Assist-A.
*
The screen will automatically return to the setting
menu screen.
[Clock] Time setting
Sets the current time. First set "hour" then "minute."
In step 2 and 4 in below procedure, you can change the values quickly by holding down Assist-X or Assist-Y.
1.
Enter the [Clock] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Clock], then
press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2.
Press Assist-X or Assist-Y to adjust the time.
•
Press Assist-X to increase the value.
•
Press Assist-Y to decrease the value.
Assist
< SC-E6100 > < SC-E7000 >
To Next Page
Loading...
