36
Switching the travel data display (SC-E6100)
1.
The type of travel data displayed changes each time you
press Assist-A or the cycle computer's function button.
Assist
or
Assist
Function button
< SC-E6100 >
Travel data
display
Display item Description
[DST] Traveling distance
*1
[ODO] Cumulative distance
[RANGE] Travelable distance
*2
[RANGE] Travelable distance for each assist mode
*2 *3 *4
[TIME] Travelable time
*4
[AVG] Average speed
*4
[MAX] Maximum speed
*4
[CADENCE] Your crank rotation speed
*4
*5
[DST] [CADENCE]
[ODO] [MAX]
[RANGE] [AVG]
[RANGE] [TIME]
*1 When [DST] is displayed, press Assist-A for 2 seconds to reset the all
all travel data.
*2 Travelable distance figures are approximations to be used for
reference purposes only.
*3 This data is displayed as follows. Gear shifting mode and gear
position are not displayed.
*4 Optional item: You can configure the display settings in E-TUBE
PROJECT. For details, refer to the "Connection and communication
with devices."
*5 Cadence is only displayed when pedaling is assisted while using
electronic gear shifting.
To Next Page
Loading...
