17
Installation/removal
Installing the brake cable
2. Spread out the tip of the liner using a thin tool such as a TL-CT12
needle.
Arrange the cut end into a perfect circle.
TL-CT12 needle
CAUTION
• Be careful not to hurt your hands with the TL-CT12 needle.
3. Install the outer cap with tongue.
Insert the outer casing until it closely contacts with the seating surface of the outer cap
with tongue.
BR-R9200 / R9210-RS
BR-R8100 / R8110-RS
BR-RS811-R
To Next Page
Loading...
