29
Installation/removal
Installing satellite shifters
8. Wind on the handlebar tape.
Wind the handlebar tape on securely so that the satellite shifter does not move.
NOTICE
• In order to protect the electric wire, use handlebar tape to secure the wire. Do
not secure the wire with the zip tie or the bracket for the cycle computer.
TECH TIPS
• The illustration shows an example of how to wind the handlebar tape.
Troubleshooting
Check the following information if you have a problem.
If the problem is not covered below or cannot be solved with the indicated method, contact a
distributor.
Symptoms Causes / possibilities Remedies
Click cannot be felt when
connecting an electric wire.
Cannot fully connect a wire.
Is there foreign matter inside the
plug or satellite shifter
connection port?
Check that there is no foreign
matter inside the plug or satellite
shifter connection port. If foreign
matter is present, use a blower
to remove it. If the problem
persists, replace the satellite
shifter with a new one.
To Next Page
Loading...
Need help?
General
