Pay attention to the following rules during maintenance:
1) Need at least two persons present when checking the machine. Let the
machine cool down, turn off power supply, drain out the oil and water.
Make sure enough place before checking and maintenance.
2) The machine works in high temperature. Stop the machine, wait it to cool
down. Put on protective gloves before servicing or maintenance.
3) In order to prolong the life of the machine and to prevent accidents, check
the machine at a fixed frequency.
4) During operation, the water is heated up to a high temperature, wait it to
fall below 30 to perform repairing or maintenance. ( Please note that it is
dangerous to check or tear down the machine during operation.)
6.1 Open the Covers
1) Open the top covers of the unit. (Refer to the pictures below)
2) Take down the side covers. (Refer to the pictures below)
6. Maintenance and Repair
Maintenance and Repair
To Next Page
Loading...
Need help?
General
