1. General Description
Please read through this operation manual before using and
installation to avoid damage of the machine and personal injuries.
STM - W series water heaters are used to heat up the mould and maintain
temperature, although they can be used in other similar applications. High
temperature water from the mould is returned to the cooling tank and cooled
by either indirect cooling (For high temperature models) or direct cooling (for
standard models). It is then pressurised by the high - pressure pump, sent to
the heating tank and finally to the mould with a constant temperature. The
o
OMRON temperature controller can maintain an accuracy of 1 C.
General Description
1.1 Main Features:
1) P.I.D. multi - stage temperature control system can maintain a mould
temperature with accuracy of
2) Adopt high efficiency high temperature pump with great pressure and stable
performance.
3) Multiple safety devices can automatically detect abnormal performance and
indicate this via visible alarm.
4) Compact design, easy to operate and maintain.
5) Inner parts made from stainless steel to ensure corrosion - free operation.
6) With stable performance and accuracy within , for standard STM - W,
the heating temperature can reach 120 .
7) STM - W adopts direct cooling method for better cooling effect and
automatic water refilling to quickly reduce water temperature to the set - point.
8) Pump reverse running for water drainage is an optional function for STM - W.
9) Upon request, it can be built to comply with worldwide electrical safety
standards ( For example : CE, UL, CSA, JIS etc. ).
o
1C.
o
1C
o
C
To Next Page
Loading...
Need help?
General
