1.3 Safety Regulations
1.3.1 Safety Signs and Labels
General Description
Danger!
The unit is designed endure high temp, and high pressure. For safe
operation, do not remove the covers or switches.
Attention!
The unit should be operated by qualified personnel only.
During operation, avoid wearing gloves or clothes that may cause
danger.
Turn off main switch when power supply is off.
Stop the unit when there may be power supply problems caused by
static electricity.
Put on safety gloves and shoes during installation or relocation.
Components from our company can only be used for replacement.
Warning!
Do not touch the switch with wet objects or hands.
Do not use the machine before fully aware of its performance.
Be careful, not to touch or hit the switch or sensor.
Please keep enough operation space, and keep away obstacles.
To avoid producing statics, clean the floor from oil or water to keep
a dry environment.
Protect the machine against severe vibration or collision.
Do not remove safety signs or make it dirty.
Drunken, medicine-taking, or men without proper judgement should
not operate the machine.
Attention
No need for regular inspection because all the electrical parts in the
control unit are fixed tightly
To Next Page
Loading...
Need help?
General
