3.4 Edit Data
During the scanning process, the scanner may vibrate slightly, the scanned surface or the
environment may be too dark for operation. Those uncertain factors upon can bring noise.
In this regard, the function of editing is developed. It supports switching the perspective and editing
the model manually in the custom selection region.
Under the feature alignment mode, after clearing all the data by the function of edit, the data
will recover once re-scanning.
When editing one or more projects, it is needed to select those projects from the project list.
The data of project turns blue once being selected.
3.4.1 Generate Point Clouds
Click to generate point clouds.
The point clouds is a collection of the point data describing the surface of scanned object in 3D
coordinate system, and the effect of generating point cloud is shown in the following figure.
Figure 3-29 Generate Point Cloud
Those large-amount point clouds data is benefit for the further editing to the model.
To Next Page
Loading...
