Export data to Geomagic Design X
Mainly used for reverse design. If the GeomagicDesign X has been installed, clicking this button will
open the GeomagicDesign X and import the mesh data.
Solid Edge SHINING 3D Edition
Export data to Solid Edge SHINING 3D Edition
Solid Edge SHINING 3D Edition is a 3D CAD software. If Solid Edge SHINING 3D Edition has been
installed, clicking this button will open the Solid Edge SHINING 3D Edition and import the
encapsulated stl data into Solid Edge SHINING 3D Edition.
The third-party software should be installed and activated in advanced.
Solid Edge Shining 3D Edition is included in the scanner. Please follow the license card to activate the software.
The rest above mentioned software are not included. Please contact us if you are interested to buy.
3.9.5 Preview Model
Double-click the Preview Tool shortcut on the desktop
Or open the Model Preview Tool in the start menu, i.e., start menu>Shining3d_Freescan UE>Preview
Tool. As shown in the figure below:
Figure 3-66 Preview Tool
Drag the file into the window to preview it:
To Next Page