Shining 3D EinScan HX - Manual Marker Alignment

EinScan HX User Manual
52
Figure 3-38 Marker Alignment
Table 3-11 Button Names
Button names
Description
Apply
Perform the alignment operation.
Next
The aligned projects will be merged into a group, which can be further
aligned.
Cancel
Undo the completed alignment.
Exit
Exit the alignment interface.
3.5.4 Manual Marker Alignment
Select two project files and manually select multiple (≥3) marker points for alignment. The selected
marker points will be cleared after aligning.
Press Ctrl+Z to cancel the selected marker points one by one.