Need help?Do you have a question about the SHOWTEC Creator 1024 and is the answer not in the manual?
General| DMX Channels | 1024 |
|---|---|
| Number of fixtures | 96 |
| Display | LCD |
| DMX output connector | 3-pin XLR |
| MIDI | Yes |
Lists the technical specifications of the Showtec Creator 1024 DMX controller.
Instructions for unpacking the Showtec Creator 1024 and checking contents.
Important safety precautions to be followed during installation and operation.
Details operating conditions and limitations for the device.
Explains how to connect the device to the mains power supply correctly.
Outlines the process for returning merchandise and obtaining an RMA number.
Details the customer's responsibility for checking and reporting shipping damage.
Describes the layout and components of the Creator 1024's front panel.
Details the Fixture and Playback areas with their respective buttons and faders.
Explains areas for attribute adjustment, functions, and fixture management.
Covers the LCD display, wheel controls, and defines key operational terms.
Instructions for creating new fixture patches, including dimmers and moving lights.
Procedures for editing existing fixture patches and DMX addresses.
Utilities for patching, including invert, instant mode, and swap pan/tilt.
Methods for selecting fixtures and modifying their attribute values using controls.
Covers advanced options like locating, aligning, fan mode, and clearing the programmer.
Differentiates shared/individual palettes and lists attributes that can be stored.
Step-by-step guide on how to store, recall, and delete palette entries.
Steps to select, playback, and edit shape parameters for fixtures.
How to delete a shape from the console's library.
Steps for creating, copying, including, and deleting scene data.
Setting fade in/out times and executing scenes in live mode.
Steps to create chases, delete steps, set timing, and import/copy steps.
How to execute chases, manage connections, and control speed/direction.
Instructions for saving/loading data via USB and wiping controller data.
Procedure to change display language and manage the fixture library.
Overview of the user interface for creating and editing fixture personalities.
Step-by-step guide to creating a new fixture personality file.
Guidelines for inspecting and maintaining the Showtec Creator 1024.
Troubleshooting steps for when the fixture or controller does not output light.
Steps to diagnose and resolve issues with DMX communication or controller response.
To Next Page
