Shure Incorporated
15/32
◦
◦
◦
•
•
•
•
•
MX395-LED
MX396
MX405/410/415
For help with specific mute sync implementations, see our FAQs.
Audio Settings
Schematic View
The schematic view in Designer provides an overview of the entire audio signal chain, with the ability to adjust settings and
monitor signals.
Adjusting Settings
Right-click an input, output, or processing block to access the following options:
Channel Settings
Setting Function
Copy / paste
Copy and paste settings between items. For example, set
the equalizer curve on the USB output, and then use the
same setting for the analog output. Or, copy the gain and
mute status from one input channel to several others.
Mute / unmute Mutes or activates the channel
Enable / disable
Turns processing on or off (does not apply to matrix mixer or
automixer)
Edit
Opens the dialog to adjust parameters. You can also double-
click a block to edit it.
Right-click in a blank area to access global settings:
Mute/unmute all input channels
Mute/unmute all output channels
Close all open dialogs
Customizing the Workspace
Create a custom environment to monitor and control a set of inputs, outputs, and processing blocks from a single screen.
There are 2 ways to break out dialogs:
Right-click > Edit
Double-click the input, output, or processing block.
Open as many dialogs as you need to keep important controls available.
Metering and DSP Blocks
A meter appears underneath each input and output to indicate signal levels (dBFS).
To Next Page
Loading...
