Shure Incorporated
2/32
ANIUSB-Matrix Audio Network Interface 3
General Description 3
Getting Started 3
Videoconferencing Room Equipment 3
ANIUSB-MATRIX Designer Setup Example 4
ANIUSB-MATRIX Parts 6
Power Over Ethernet (PoE) 8
What's in the Box 8
Control Devices with Shure Designer Software 8
Use Designer's Auto Route 8
Installation and Rack Mounting 9
Securing the Devices 9
Rack Ear Configuration 10
Installing Underneath a Table 11
Connections and Signal Flow 11
Connecting the ANIUSB-MATRIX to a Computer 13
USB Device Type Settings 13
Mute Sync 13
Audio Settings 15
Schematic View 15
Mute and Fader Groups 16
Adjusting Input levels 16
Adjusting Output Levels 16
Parametric Equalizer 16
Custom Presets 19
Matrix Mixer 19
Crosspoint Gain 20
Routing Channels 20
ANIUSB-MATRIX Default Routes 20
Use Call Status 20
Encryption 21
Set Up the 802.1X Protocol for a Device 21
Turn Off or Clear 802.1X Settings 22
Change 802.1X Settings 22
Troubleshooting 802.1X Setup Issues 22
Networking and Dante 23
Switch and Cable Recommendations for Dante Network
ing 23
Dante Flows for Shure Devices 23
Pushing Names to the Dante Network 24
Compatibility with Dante Domain Manager 24
Change IP Settings 24
Setting Latency 24
IP Ports and Protocols 25
Using Command Strings 25
Reset 26
Software Reset Options 26
Troubleshooting 26
Event Log 27
Specifications 28
Optional Accessories and Replacement Parts 30
Safety Information 30
IMPORTANT SAFETY INSTRUCTIONS 30
Important Product Information 31
Information to the user 32
To Next Page
Loading...
