Shure ANIUSB-Matrix - Optional Accessories and Replacement Parts; Safety Information; Important Safety Instructions

Shure Incorporated
30/32
1.
2.
Line 86 dBV
Aux 98 dBV
Total Harmonic Distortion
@ 1 kHz, 0 dBV Input, 0 dB analog gain
<0.05%
Common Mode Rejection Ratio
150Ω balanced source @ 1 kHz
>70 dB
Impedance
10.6 kΩ
Input Clipping Level
Line +27 dBV
Aux +15 dBV
Output Clipping Level
Line +20 dBV
Aux +0 dBV
Mic 26 dBV
Built-in Digital Signal Processing
Per Channel Equalizer (4band Parametric, Analog and USB output channels only) , Mute, Limiter, Gain ( 140 dB range)
System Matrix mixer
Networking
Cable Requirements
Cat 5e or higher (shielded cable recommended)
Optional Accessories and Replacement Parts
19" rack tray CRT1
Safety Information
IMPORTANT SAFETY INSTRUCTIONS
READ these instructions.
KEEP these instructions.