Shure ANIUSB-Matrix - ANIUSB-MATRIX Designer Setup Example

Shure Incorporated
4/32
•
•
•
•
•
◦
◦
◦
◦
◦
◦
•
•
•
•
•
•
•
•
•
•
•
Computer with videoconferencing software
Network switch
Camera
Other accessories such as table mute buttons, tablets to control meetings, and other peripherals
The Microflex
®
Ecosystem offers a complete portfolio of networked audio solutions that can be precisely tailored to your needs.
What Software Do I Need to Set Up the ANIUSB-MATRIX?
Install this software on a computer that connects to the same network as the ANIUSB-MATRIX:
Control software to adjust ANIUSB-MATRIX settings. This device has 2 options:
Option 1: Shure Designer
Use for managing lots of Shure devices in 1 place
Control Shure devices and route audio between them
Create rooms to manage devices and design coverage
Option 2: Web application (open using Shure Web Device Discovery)
Use to manage each Shure device separately
Control each device individually with its web application
Route audio using Dante Controller
Dante Controller to send audio signals to other Dante devices. Not necessary if you're only routing audio to Shure de
vices in Designer.
Shure Web Device Discovery to easily find device web applications. Not necessary if you're only using Designer.
Shure Update Utility to update firmware on Shure devices (download at shure.com/suu)
ANIUSB-MATRIX Designer Setup Example
This example uses Shure Designer 6.0 software to set up an ANIUSBMATRIX and an MXA902. You can use a different micro
phone with the ANIUSB-MATRIX, but the setup process in Designer is similar.
After completing this basic setup process, you should be able to:
Access the ANIUSB-MATRIX in Designer
Adjust settings and route audio
Understand the basic workflow for working with devices in Designer
This example uses:
Cat5e or better Ethernet cable (shielded cable recommended)
Network switch that provides Power over Ethernet Plus (PoE+)
Shure Designer software (download at shure.com/designer)
MXA902
Computer with videoconferencing software
For best results, route 1 microphone to the ANIUSB-MATRIX. If using multiple microphones in a space, use a device with an
automixer (such as a P300 or IntelliMix Room
®
).