Shure Incorporated
21/32
•
•
•
•
•
•
•
•
•
•
◦
1.
◦
1.
2.
•
Microphone LEDs on = In a call
Call status is compatible with the following codecs:
Microsoft Teams
Microsoft Teams Rooms
Zoom Client for Meetings
Zoom Rooms
Note: If your codec is running on a computer with a Chrome operating system, call status will not work.
Encryption
Audio is encrypted with the Advanced Encryption Standard (AES-256), as specified by the US Government National Institute of
Standards and Technology (NIST) publication FIPS-197.
Encryption is not supported with third-party devices.
Important: For encryption to work:
Devices must be online and support encryption.
Encryption must be turned on for all devices in the room.
You must disable AES67 in Dante Controller. AES67 and AES-256 can't be used at the same time.
To turn on encryption:
In an online room, select > Audio encryption > Turn on encryption. You can auto generate a key or enter one
manually.
To re-key or turn off encryption:
In an online room, select > Audio encryption and enter any passwords.
Set Up the 802.1X Protocol for a Device
Select Shure devices support the IEEE 802.1X port access protocol for network authentication.
Important: To use the 802.1X security protocol with Shure devices, set the network switch to multiple host authentication. You
must also make accommodations to allow the audio network interface to connect to the network. The audio network interface
doesn't support the 802.1X protocol.
Setting up 802.1X is a two-part process.
To set up 802.1X, you will need:
Details about your authentication server's EAP method
Any required credentials or certificates for that method, for example:
MD5 and PWD
User ID and passphrase
TLS and PEAP
User ID and passphrase
Certificate (with certificate types) in the .PEM format
Any passwords to access the devices if they are password locked
To Next Page
Loading...
