Shure MXA310 - Page 49

Shure Incorporated
49/76
Command String:
< GET x AUTOMIX_GATE_OUT_EXT_SIG >
Where x is ASCII channel number: 0
through 4. It is not necessary to con
tinually send this command. The
MXA310 will send a REPORT mes
sage whenever the status changes.
MXA310 Response:
< REP x AUTOMIX_GATE_OUT_EXT_SIG ON >
< REP x AUTOMIX_GATE_OUT_EXT_SIG OFF >
The MXA310 will respond with one
of these strings.
External Switch Out
Command String:
< GET EXT_SWITCH_OUT_STATE >
It is not necessary to continually
send this command. The MXA310
will send a REPORT message
whenever the status changes.
MXA310 Response: < REP EXT_SWITCH_OUT_STATE ON >
< REP EXT_SWITCH_OUT_STATE OFF >
The MXA310 will respond with one
of these strings.
Mute Button Status
Command String:
< GET MUTE_BUTTON_STATUS >
It is not necessary to continually
send this command. The MXA310
will send a REPORT message
whenever the status changes.
MXA310 Response:
< REP MUTE_BUTTON_STATUS ON >
< REP MUTE_BUTTON_STATUS OFF >
The MXA310 will respond with one
of these strings.
Mute Button LED State
Command String:
< GET MUTE_BUTTON_LED_STATE >
MXA310 Response:
< REP MUTE_BUTTON_LED_STATE ON >
< REP MUTE_BUTTON_LED_STATE OFF >
The MXA310 will respond with one
of these strings.
Get Ring LED State (Use when GUI Lighting Style is set to RING)