Shure MXA310 - Page 50

Shure Incorporated
50/76
Command String:
< GET DEV_LED_IN_STATE >
This command is only available
when both “Mute Control Function”
is set to “Logic Out” or "Disabled"
AND Light Ring “Lighting Style” is
set to “Ring” in the GUI.
MXA310 Response:
< REP DEV_LED_IN_STATE ON >
< REP DEV_LED_IN_STATE OFF >
The MXA310 will respond with one
of these strings.
Set Ring LED State (Use when GUI Lighting Style is set to RING)
Command String:
< SET DEV_LED_IN_STATE ON >
< SET DEV_LED_IN_STATE OFF >
Send one of these commands to the
MXA310. This command is only
available when both “Mute Control
Function” is set to “Logic Out” or
"Disabled" AND Light Ring “Lighting
Style” is set to “Ring” in the GUI.
MXA310 Response:
< REP DEV_LED_IN_STATE ON >
< REP DEV_LED_IN_STATE OFF >
The MXA310 will respond with one
of these strings.
Get Segments LED State (Use when GUI Lighting Style is set to SEGMENTS)
Command String:
< GET x CHAN_LED_IN_STATE >
This command is only available
when both “Mute Control Function”
is set to “Logic Out” or "Disabled"
AND Light Ring “Lighting Style” is
set to “Segments” in the GUI.
MXA310 Response:
< REP x CHAN_LED_IN_STATE ON >
< REP x CHAN_LED_IN_STATE OFF >
The MXA310 will respond with one
of these strings.
Set Segments LED State (Use when GUI Lighting Style is set to SEGMENTS)