Shure MXA310 - Page 56

Shure Incorporated
56/76
Command String:
< SET xx PEQ yy ON >
< SET xx PEQ yy OFF >
Send one of these commands to the
MXA915.
MXA310 Response:
< REP xx PEQ yy ON >
< REP xx PEQ yy OFF >
Where xx is the PEQ block 01-04. 5
is the PEQ on the automix out chan
nel. Where yy is the PEQ filter 01-04
within the selected block. 00 can be
used for all blocks or all filters.
Get Bypass All EQ (firmware > v3.0)
Command String:
< GET BYPASS_ALL_EQ >
MXA310 Response:
< REP BYPASS_ALL_EQ sts >
Where sts can be:
• ON
• OFF
Set Bypass All EQ (firmware > v3.0)
Command String:
< SET BYPASS_ALL_EQ sts >
Where sts can be:
• ON
• OFF
• TOGGLE
MXA310 Response:
< REP BYPASS_ALL_EQ sts >
Where sts can be:
• ON
• OFF
Get Polar Pattern (firmware > v2.0)
Command String:
< GET x POLAR_PATTERN >