Shure QLXD2 Manual

① Group
Displays group setting.
② Channel
Displays channel setting.
③ Active Antenna Indicator
Illuminates to indicate which antenna is active.
④ RF Signal Meter
Number of bars displayed corresponds to RF signal level - OL = overload.
⑤ Audio Meter
Number of bars displayed corresponds to audio level.
• OL = Illuminates when receiver audio limiter is active to prevent clipping
• TxOL = Illuminates when transmitter input is overloaded. Reduce input from microphone or instrument to prevent clipping.
⑥ Gain Level
Displays receiver gain setting in 1 dB increments.
⑦ Receiver Lock Status
Lock icon and name of locked control:
• menu
• power
• gain
⑧ Frequency Setting
Selected frequency (MHz).
⑨ Encryption Status
Illuminates when encryption is enabled.
⑩ Scan
Displayed when scan function is active.
⑪ Network Scan
Displayed when network scan function is active in multi-receiver systems.
⑫ Network Connection Indicator
Illuminates when additional Shure components are detected on the network.
⑬ TV Channel
Displays the number of the TV channel containing the selected frequency.
⑭ Transmitter Battery Icon
Indicates remaining battery life.
Enable the Low Battery Alert to flash the receiver display when battery runtime is less than 30 minutes.
⑮ SB900 Battery Runtime
When the transmitter is powered by a Shure SB900 rechargeable battery, remaining runtime is displayed in hours:minutes.
Navigating the Receiver Menus
The receiver has a main menu for setup and configuration and an advanced menu to access additional receiver functions.
Main Menu
Press the menu button to access the menu. Each additional press of the menu button advances to the next menu screen in the following order:
MH z
T V MHz
group ch annel
T V MHz
audior f gain
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
gr ou p
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
ch anne l
scan
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
channel
netwo rk scan
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
channel
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
1 2 3
4567
① Scan
Receiver automatically scans for the best available frequency
Shure IncorporatedQLX-D Wireless System
2017/10/048/34

Shure QLXD2 Specifications

General

RF power	1.1 mW
Form factor	Handheld transmitter
Antenna type	Built-in
Display type	LCD
Compatibility	Shure QLXD4 Digital Wireless Receiver
Product color	Black
Average latency	2.9 ms
Built-in display	Yes
Housing material	Metal
Security algorithms	256-bit AES
Maximum outdoor range	100 m
Operating frequency type	Ultra High Frequency (UHF)
Radio Frequency (RF) range	606 - 670 MHz
Operating temperature (T-T)	18 - 50 °C
Microphone frequency response	30 - 20000 Hz
Total Harmonic Distortion (THD)	0.1 %

Weight and Dimensions

Width	51 mm
Height	256 mm
Weight	347 g