- 9 -
- AGP Expansion Slots
Provides one 32-bit AGP slot which supports 4X AGP devices.
- CNR Expansion Slot
Provides one CNR (Communication/ Network Riser) slot.
- 6 USB 2.0 Interface Onboard
Ø 4 USB connectors on back-panel and one set of dual USB ports headers
on mid-board.
- I/O Interface
Provides a variety of I/O interfaces:
Ø 1* Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, or 2.88MB
format or for 5.25-inch FDD with 360K or 1.2MB format.
Ø 1*PS/2 mouse connector.
Ø 1*PS/2 Keyboard connector.
Ø 1*RJ45 LAN connector.(MV43VN Only)
Ø 1*DB9 serial connector 16550 UART compatible.
Ø 4*USB ports.
Ø 1*VGA port.
Ø 1*DB25 Parallel port supports Standard Parallel Port and Bi-directional
(SPP), Enhanced Parallel Port (EPP), and Extended Capabilities Port
(ECP) data transmission schemes.
Ø 1*Line-Out port.
Ø 1*Line-In port.
Ø 1*Mic-In port.
- PCI Bus Master IDE Controller Onboard
Two Ultra DMA 133/100/66/33 Bus Master Dual-channel IDE ports provide
support to a maximum of four IDE devices (one Master and one Slave per chan
The IDE Bus implements data transfer speeds of up to 133/100 /66/33 MB/
sec and also supports Enhanced PIO Modes.
80-pin Cable Backward Compatible Legacy ATAPI Devices, ATAPI IDE CD-
ROM, CD-R, CD-RW, and LS-120 Supports.nel).
- ATX Power Supply Connector
ATX power supply unit can connected to the onboard 20-pin Pentium 4
standard ATX power connectors, supporting Suspend and Soft-On/Off by
dual-function power button.
The Pentium 4 ATX power include one 4-pin+12V ATX power connector.
To Next Page
Loading...
