Shuttle MV43V - Load Optimal Setting; Load Best Performance Setting

- 59 -
@ Load Optimal Settings
When you press <Enter> on this item, you will get a confirmation
dialog box with a message similar to:
Load Optimal settings (Y/N) ? N
Pressing 'Y' the Setup Utility loads a set of fail-safe default values.
These default values are not very demanding and they should allow
your system to function with most kinds of hardware and memory
chips.
@ Load Best Performance Settings
When you press <Enter> on this item, you will get a confirmation
dialog box with a message similar to:
Load best performance settings (Y/N) ? N
Pressing 'Y' the Setup Utility loads a set of best-performance default
values. These default values are quite demanding and your system
might not function properly if you are using slower memory chips or
other low-performance components.