Shuttle MV43V - STEP 13 Install Drivers & Software Components

- 22 -
Step 13
Install Drivers & Software Components
Please note that all the system utilities and drivers are designed for Win 9x/
2000/ME/NT operating systems only. Make sure your operating system is
already installed before running the drivers installation CD-ROM programs.
1. Insert the MV43V/MV43VN bundled CD-ROM into your CD-ROM drive.
The autorun program will display the drivers main installation window
on screen.
2. Choose "Install Mainboard MV43V Driver" bar to run into sub- menu for
MV43V setup.
3. Choose "Install Mainboard MV43VN Driver" bar to run into sub- menu
for MV43VN setup.
4. Choose "Install VIA Chipset Driver" and complete it.
5. Choose "Install VGA Device Driver" and complete it.
6. Choose "Install Audio Driver" and complete it.
7. Choose "Install USB2.0 Driver" and complete it.
8. Choose "Install LAN Driver" and complete it.(MV43 VN Only)
9. Return to the main installation window and exit from the auto-run drivers
installation program.