85
Chapter 2. Unpacking and First Operation
2.3.5 Connection of analytical balances
Analytical balances are to be connected to the RS232-2 using an appropriate cable
2.4 Setting the Language of the Country
The ex-factory default language setting is English. When the piston burette is switched on, the main menu will
appear once the boot sequence is completed:
Fig. 8
Using <SYS/<F7> or <MODE>, followed by <System settings> you navigate to the system settings. The very first
menu is to be used for setting the language of the country:
Fig. 9
Use <ENTER>/<OK> to call the menu. Select the national language using the <↑↓> arrow keys, confirm it with
<ENTER>/<OK>:
Fig. 10
The selected language will appear immediately. Pressing the <ESC> key twice will return the user to the main
menu.
To Next Page
Loading...
