SI Analytics TitroLine 7500 KF - Initial Filling or Rinsing of the Entire Interchangeable Unit

90 Chapter 2. Unpacking and First Operation
Fig. 18
2.7 Initial Filling or Rinsing of the Entire Interchangeable Unit
Initial filling of the interchangeable unit is done using the <rinsing > rinsing programme.
Fig. 19
On the main menu (fig. 19), press <MODE> key to navigate to the methods/system (fig. 20).
Fig. 20
Pressing <↑> twice will take you to the <Rinsing> selection immediately (fig. 21).