5 System settings
Fig. 105
From the main menu (Fig. 107), <SYS>/<F7> will get you to the system settings:
Fig. 106
Setting the national language was already described in Chapter 2.5.
5.1 Interchangeable Unit - Reagents
Each interchangeable unit is equipped with an RFID transponder. This transponder can be used to store the
following information:
• Unit size: (the default setting, cannot be changed)
• Unit ID: (default setting, cannot be changed)
• Reagent name: (default: blank)
• Concentration: (default: 1.000000)
• Concentration determined on: (Date)
• To be used until: (Date)
• Opened/Produced on: (Date)
• Test according to ISO 8655: (Date)
• Charge description: (default: no charge)
• Last modification: (Date)