SI Analytics TitroLine 7500 KF - Page 29

98
Chapter 3 – Working with the titrator TitroLine
®
7500 KF
<MODE>/F6 leads you to the “select method“ menu (Fig. 29).
Fig. 29
Existing methods can be selected by pressing the <↓> und <↑> keys and confirming the selection with
<OK>/<ENTER>. Once the selection made, you will return to the main menu with the newly selected method. If
no method is selected, <ESC> will also take you back to the main menu.
To navigate directly to the system settings (Fig. 30 and Fig. 31) you can use the <SYS>/F7 key; you can also
navigate there through the method selection menu.
Fig. 30
Fig. 31