4.6.2.7 Global Memories
Results of titrations can be written into one of the 50 global memories (M01 - M50) for additional calculations.
Fig. 82
The mean value is written into the global memory when the statistic is switched on. You enter the submenu with
<Enter/OK>. If a global memory has not been created, a memory can be created by using the insert key <Ins>.
The titrator proposes a memory name, such as M01 (M01- M50). The name of the memory can be changed in
reference to the application. Here in this example of “M01” for “Blank value”.
Fig. 83
This simplifies later the allocation of the global memory in another method.
Example Titer determination: The titer in mg/ml is defined with an extra Titer method. The result in mg/ml is
thereby automatically written into global memory “Exchangeable unit”.
Fig. 84
The menu for the global memory can always be accessed by pressing Shift+F5 or via system settings. The name
or values can be changed by using EDIT/F3 and have the methods shown that are used in the global memories.
To Next Page
Loading...
