Re
-Fill And Bleed
After you have installed your Pump, refill and bleed your manual steering system according to the
manufacturer's directions. Any air, which is in the pump, will be expelled during the Set-up Routine.
Technical Specifications
Part Number: 20810016 20810031 20810018 20810035
Model Number: 18CI 18CI 30CI 30CI
Operating Voltage: 12VDC 24VDC 12VDC 24VDC
Max Displacement @ 200PSI: 73 in
3
73 in
3
122 in
3
122 in
3
Current @ 200 PSI: 4.5 Amps 3.0 Amps 6.0 Amps 3.0 Amps
Max Pressure: 800 PSI 800 PSI 500PSI 500PSI
Specifications Common To Both Pumps
Port Sizes:
- 3/
8 inch compression fittings supplied
Displacement (18CI): -
Ad
justable, from 26in
3
(600cm
3
) to 73in
3
(1200cm
3
)
Displacement (30CI): -
Ad
justable, from 61in
3
(1000cm
3
) to 122in
3
(2000cm
3
)
Min Stall Pressure: -
12
00 PSI (84.0 Bar) (8,268 kPa)
Oil Type: - Any approved hydraulic steering fluid
Operating Temperature: -
0
to 50 Degrees Celsius (32 to 122 Fahrenheit)
Lockvalve: -
Ye
s
Lockvalve Leakage:
-
Negligible
Unbalanced Cylinder: -
Ye
s, up to 3/4 (1.9cm) diameter rod
Weight: - 5.0 lbs (2.27 kg) including wire
Size: -
10
inches x 3.75 inches x 4.75 inches
Size (metric): -
254mm x 95mm x 121mm
Shaf
t Seal: -
10
0 PSI (6.89 Bar) (689 kPa) minimum
To Next Page
