Fig.17g
- If the RFU valve (A, Fig.17h) is present, proceed as follows:
• unscrew the nut (C, Fig.17h)
• unscrew the adjustment tap completely (B, Fig.17h)
• tighten the nut (C, Fig.17h)
- Update the SW MBU version with the 1.5 of 19/02/2018 release and the SD version with the 10.4 of 17/01/2017 release. For the SW update,
follow the instructions in the service manual.
Fig.17h
To Next Page
Loading...
