Need help?Do you have a question about the SICE S 65E and is the answer not in the manual?
General| Brand | SICE |
|---|---|
| Model | S 65E |
| Category | Wheel Balancers |
| Language | English |
Diagnose and resolve problems when the machine fails to power on.
Address issues with monitor display, including incorrect centering, brightness, or colors.
Diagnose and resolve issues when the spin function does not activate.
Details of the PEAL 32F power supply board and its LED indicators.
Information on the MBUGRF CPU board, including LED indicators and checks.
Configure machine to enable wheel spin using a dedicated button.
Adjust screen format to suit the specific monitor used.
Configure market-specific imbalance thresholds for accurate balancing.
Enable programme for subsequent wheel spins to check for anomalies.
Configure machine logo settings, including displaying or hiding manufacturer logos.
Instructions for downloading updated firmware and graphics versions from the manufacturer's website.
Steps for updating the MBUGRF firmware using the WBS application.
Update SD board graphics using Win32 Disk Imager application.
Update SD and MBU software using a USB key for the machine.
Check and replace the diameter sensor.
Check and replace the distance sensor.
Replace the zero position sensor.
Check, adjust, or replace the width potentiometer.
Check the ultrasonic width sensor range and connections.
Procedure for replacing and adjusting the drive belt.
Procedure for replacing the spin motor.
Procedure for replacing the braking device.
Procedure to replace the micro-switch for the wheel guard.
Procedure to replace the gas strut.
Verify LED light and laser device functionality and voltages.
Procedure to replace the ILL board.
To Next Page
