5 TROUBLESHOOTING
58
OPERATING INSTRUCTIONS | AFS60/AFM60 PROFINET 8015078/1EF3/2021-12-13 | SICK STEGMANN
Subject to change without notice
Subindex .1 – Sensor status (S_STAT-B)
Memory error caused by invalid checksum on
reading the EEPROM during encoder initialization:
In the area of the sensor configuration data
In the area of the device configuration data
In the area of the diagnostics of the basic
process data
In the area of the diagnostics of the service
data
In the area of the user configuration,
communication mapping
In the area of the user configuration, basic
parameters
Warning, speed exceeds configured maximum
value
Warning, triggered on executing the preset
function. The preset value is outside the measuring
range (CMR).
Warning, occurred on changing or writing
parameter values:
In the area of the encoder profile specific
objects
Table 45: Subindex .1 – Sensor status (S_STAT-B)
To Next Page
Loading...
Need help?
General
