SICK deTec4 Core Ex II 3GD - Page 37

1
2
3
Figure 22: Mounting the FlexFix bracket to a profile frame
Approach
1.
After assembling the FlexFix brackets, screw the sender or receiver into the FlexFix
brackets from the front. (1)
2.
Align the sender and receiver. (2)
3. Use an M5 screw to secure the position of the sender and receiver in the FlexFix
bracket. (3)
1 2 3
Figure 23: Inserting the safety light curtain in the FlexFix brackets
MOUNTING 5
8021796/1DCM/2022-10-27 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex II 3GD
37
Subject to change without notice