SICK deTec4 Core Ex II 3GD - Alignment with the Quickfix Bracket; Alignment with the Flexfix Bracket or with the Upgrade Bracket

Further topics
•
"Indic
ation of the alignment quality", page 49
•
"Mounting", page 31
7.3.2 Alignment with the QuickFix bracket
Prerequisites
•
T
he sender and receiver are mounted with a QuickFix bracket
Alignment with the QuickFix bracket
T
he QuickFix bracket offers you the following adjustment options for aligning the sender
and receiver with each other:
•
Shift vertically
Figure 32: QuickFix bracket: adjust vertically
7.3.3 Alignment with the FlexFix bracket or with the upgrade bracket
Prerequisites
•
A F
lexFix bracket or upgrade bracket is used to mount the sender and receiver.
Alignment with the FlexFix bracket or the upgrade bracket
T
he FlexFix bracket or upgrade bracket offer you the following adjustment options for
aligning the sender and receiver with each other:
•
Shift vertically
•
Rotate (±15°)
COMMISSIONING 7
8021796/1DCM/2022-10-27 | SICK O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex II 3GD
47
Subject to change without notice