1 About this document
1.1 Purpose of this document
These operating instructions contain information required during the life cycle of the
s
afety light curtain.
These operating instructions are available to all those who work with the safety light
curtain.
Please read these operating instructions carefully and make sure that you understand
the content fully before working with the safety light curtain.
1.2 Scope
This document applies to the following products:
•
Pr
oduct code: deTec4 Core Ex II 3GD
•
“Operating instructions” type label entry: 8021794
Document identification
Document part number:
•
This document: 8021796
•
Available language versions of this document: 8021794
You can find the current version of all documents at www.sick.com.
1.3 Target groups of these operating instructions
Some sections of these operating instructions are intended for certain target groups.
Ho
wever, the entire operating instructions are relevant for intended use of the product.
Table 1: Target groups and selected sections of these operating instructions
Target group Sections of these operating instructions
Project developers (planners, developers,
designers)
"Project planning", page 16
"Technical data", page 57
"Accessories", page 64
Installers "Mounting", page 31
Electricians "Electrical installation", page 42
Safety experts (such as CE authorized repre‐
sent
atives, compliance officers, people who
test and approve the application)
"Project planning", page 16
"Commissioning", page 45
"Technical data", page 57
"Checklist for initial commissioning and com‐
missioning", page 74
Operators "Operation", page 51
"T
roubleshooting", page 54
Maintenance personnel "Maintenance", page 52
"T
roubleshooting", page 54
1.4 Additional information
www.sick.com
T
he following information is available on the Internet:
•
Data sheets and application examples
•
CAD data and dimensional drawings
1 A
BOUT THIS DOCUMENT
6
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex II 3GD 8021796/1DCM/2022-10-27 | SICK
Subject to change without notice