SICK deTec4 Core Ex II 3GD - Mounting the Upgrade Bracket

1
2
3
Figure 25: Mount the Compact FlexFix bracket on a profile frame
Approach
1.
After assembling the Compact FlexFix brackets, screw the sender or receiver into
the Compact FlexFix brackets from the front. (1)
2.
Align the sender and receiver. (2)
3. Use an M5screw to secure the position of the sender and receiver in the Compact
FlexFix bracket.(3)
1 2 3
Figure 26: Inserting the safety light curtain in the Compact FlexFix brackets
5.2.4 Mounting the upgrade bracket
Overview
If an e
xisting C4000 safety light curtain is mounted with a swivel-mount bracket or with
a side bracket, it can be replaced with a deTec4 Core Ex II 3GD safety light curtain
using a replacement bracket. There is no need to drill new holes, since the existing
ones can be used for the replacement bracket.
5 MOUN
TING
40
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex II 3GD 8021796/1DCM/2022-10-27 | SICK
Subject to change without notice