SICK deTec4 Core Ex II 3GD - Safety Information; General Safety Notes

2 Safety information
2.1 General safety notes
DANGER
T
he product can not offer the expected protection if it is integrated incorrectly.
b
Plan the integration of the product in accordance with the machine requirements
(project planning).
b
Implement the integration of the product in accordance with the project planning.
DANGER
D
eath or severe injury due to electrical voltage and/or an unexpected startup of the
machine
b
Make sure that the machine is (and remains) disconnected from the voltage
supply during mounting and electrical installation.
b
Make sure that the dangerous state of the machine is and remains switched off.
DANGER
Im
proper work on the product
A modified product may not offer the expected protection if it is integrated incorrectly.
b
Apart from the procedures described in this document, do not repair, open, manip‐
ulate or otherwise modify the product.
WARNING
Ris
k of ineffectiveness of the protective device
Please observe the following information to ensure safe and correct use of the device.
b
Special national and international regulations and guidelines apply for the mount‐
ing, use, commissioning, and regular technical inspection of electrical devices
in explosion-hazardous areas, in particular ATEX Directive 2014/34/EU and the
IECEx scheme. Manufacturers of and entities operating machines using the safety
light curtain are responsible for ensuring that all applicable safety regulations and
guidelines are complied with.
b
These operating instructions must be made available to the operator of the
machine on which the device is used. Qualified safety personnel must instruct
the operator on how to use the device. The operator must also be directed to read
and follow the operating instructions.
DANGER
Ris
k of ignition
Failure to observe this instruction can result in a risk of ignition from potential sparking.
b
Ensure that only accessories that are approved for explosion-hazardous areas are
used.
2 SAFETY INFORMATION
8
O P E R A T I N G I N S T R U C T I O N S | deTec4 Core Ex II 3GD 8021796/1DCM/2022-10-27 | SICK
Subject to change without notice